To achieve the pressure and flow rate characters of pulsatile flow, this paper designs a experimental measurement system which is used to simulate and measure the pressure and flow rate of fluid in the flexible pipeline. On the basis of theory about hydraulic pressure system used in industry, the pulsatile flow with a certain frequency was completed at the inlet of system when a magnetic valve was controlled in the same frequency by singlechip 89S51. The software of an acquisition program was designed in LabVIEW, which was used for measuring the values of the pressure and flow rate with different pulsatile frequencies of entrance flow. The characters of pressure and flow rate in a pulsatile flow circuit were obtained and analyzed in the preliminary experiments. It was indicated that the pressure and flow rate obviously increased with the increase of pulsatile frequencies of entrance flow. In a same frequency, along with the power supply distance’s increase, the pressure value reduced, but the flow rate did not change remarkably.
|